mixing machine china. shengli.


   Chat with me

Tel: +86-21-69176536

Fax: +86-21-69176595


CMS continuous mixer

Cm-series continuous mixer can achieve feeding and discharging simultaneously. It is normally matched in the large scale production line, on the basis of mixing material evenly, it can ensure the consistency and stability of all the product.

Total volume: 0.3-30cbm
Capacity per hour: 5-200cbm
Motor power: 3kw-200kw
Material: 316L, 304, mild steel

  • Introduction
  • Principle
  • Structure
  • Data
  • Supporting
  • Video
  • Download
  • pictures

The CMS (Continuous single shaft plough mixer), focus on mixing, it can also convey the material. With the special inner structure, it can adapt to a certain range of the feeding speed, to achieve relevant productivity. With the uniform speed feeding equipment, it can mix material in a wide range, and make sure the consistency and stability of all the product. 


CMD ( continuous double shaft paddle mixer) is characterized by maximizing the productivity. Materials are scattered during the vigorous mixing process, diffused and nobbed between the meshing space of the twin shafts. It can be applied to mix fiber and granules. 

Notice for continuous mixer:
1. Make sure the stable and continuous feeding.
2. Make correct feeding speed ratio in accordance to the material formula.
3. Equipment under the discharging should handle the material in time and make sure no blockage of the material when discharging.
4. Small additives less than 5%, should be premixed before loading to continuous mixer.
5. Mixer productivity is determined by the speed of feeding system. Mixer model and size are determined by productivity, homogeneity and material property.